Frequently Asked Questions

Why Momedic?

Momedic dispensers were designed with healthcare professionals in mind.  Our users have reported an increase in frequency of hand hygiene because of our products.  In environments where there is limited access to wall dispensing sanitisers, our dispensers allow for ease of use through their ergonomic and simple design. 

Momedic dispensers allow for discrete sanitising without the need to remove a cap or interrupt what you are doing.  Our user testing has shown Momedic dispensers make hand hygiene significantly quicker.  

Our dispensers also help you to reduce your single use plastic waste. 

Important:

Always keep your Momedic dispenser out of reach of children!

Do not use the dispenser near or directed towards your face or eyes.

Alcohol based hand rub is flammable, keep away from ignition sources!

  • Hold the dispenser with the dispensing end facing down. Gently squeeze the dispenser from the bulb end to deliver the desired amount of sanitiser.

  • Momedic dispensers have a two way valve that does not leak unless the dispenser is squeezed.

    Be mindful to not leave your dispenser in an area where it may be accidentally activated.

  • The external areas of the dispenser can be cleaned with a disinfectant wipe as required.

    If the inside of the dispenser becomes contaminated or you are changing varieties of Alcohol based hand rub, it is recommended the dispenser be emptied, then cleaned with warm soapy water. The dispenser should then be allowed to dry thoroughly prior to refill.

    If the dispenser is being used in a healthcare environment, the dispenser can be cleaned with a chlorine based cleanser as required.

  • Simply unscrew the lid, and refill with your favourite sanitiser gel. Refill until sanitiser reaches the top of the transparent plastic. This is equal to 40ml of sanitiser.

    Do not mix different alcohol based hand rubs as this may lead to clogging of the valve.

  • The Momedic dispenser is not designed for use on aircraft as changes in air pressure may cause sanitiser to be dispensed. If travelling with your Momedic dispenser, we recommend emptying it prior, or storing it in a zip lock bag in your luggage.

  • The stethoscope mounted Momedic dispenser will mount to most standard sized stethoscopes.

    Please ensure your bell end can be removed prior to purchase.

    It can be mounted on either the stethoscope tube or the meal ear piece.

    Simply remove the bell end of the stethoscope and place a small amount of sanitiser on the loops of the dispenser mount, then simply slide the dispenser onto the tube.

    Or remove the earpiece then slide the dispenser on to the metal ear tube.

  • This will depend on how often you sanitise your hands. As a healthcare professional in a busy location, refilling each shift will ensure a full dispenser is always at hand. Each time you refill you are reducing your single use plastic waste.

  • Always keep out of reach of children!

    Do not store in direct sunlight as this will heat the sanitiser and may cause the dispenser to leak.

    Do not leave the dispenser in hot locations such as a car. This may lead to the dispenser leaking.